AP-Magazine.com | Manufacturers & Suppliers

Products Name:Rack End

Features Specifications:Axial joints are used only in rack-and-pinion steering systems and must guarantee large angular travels of as much as 60° in mostly short steering tie rods.
To ensure and adequate overlap between ball socket and housing collar, ball diameters＞23mm must be provided. This configuration allows maximum axial tension forces of 25Kn. In practice, three different types of design are used:
(1) Casing with internal thread for bolting onto the steering tie rod, and ball stud pin with external thread to bolt into the steering rack.
(2) Casing with threaded stud pin for bolting into the steering rack, and extruded ball at the end of the rack.
Casing with threaded bore for bolting onto the steering rack, and extruded ball at the end of the rack.

Company Name: Aupart Suspension Co.,Ltd.
Business Type: Manufacturer
Main Product: CONTROL ARM,TIE ROD END,RACK END,STABILIZER LINK,BALL JOINT
Main Markets: Thailand, Malaysia, Singapore, Indonesia, USA
Address: No36, Alley 126, Lane 68, Sec 2, Sinan Rd, Wurih Township, Taichung County 414 Taiwan R.O.C.
Tel: 886-4-23358688
Fax: 886-4-23359258

• Rack End
• Rack End
• Rack End
• Rack End
• Rack End
• Rack End
• Rack End
• Rack End
• Rack End
• Rack End